Overview

The John Deere 4110 is a compact utility tractor designed for versatility and efficiency in small to medium-scale farming and landscaping tasks.

Manufactured by Yanmar in Japan for John Deere, it belongs to the 4000 Ten Series of tractors.

The 4110 is favored for its manageable size, power, and range of available attachments, making it an excellent choice for private farms, estates, and commercial landscaping operations.

Engine Details and Specifications

The jd4110 is powered by a Yanmar 1.0-liter, 3-cylinder diesel engine delivering a net engine power of 19 horsepower (14.2 kW) and a gross power of approximately 20 HP.

This engine operates at 2,650 RPM and is well-known for its fuel efficiency and reliability. Fuel capacity is 5.8 gallons (22 liters), supporting extended use without frequent refueling.

Key Specifications

Engine: Yanmar 1.0L 3-cylinder diesel

Net Power: 19 HP (14.2 kW)

Gross Power: 20 HP (14.9 kW)

PTO Power: 17 HP (12.7 kW)

Fuel Capacity: 5.8 gallons (22 L)

Hydraulic System Capacity: 3.6 gallons (13.6 L)

Transmission: 8-speed unsynchronized gear and hydrostatic options

Four-wheel drive (mechanical)

Power steering and mechanical rear differential lock

Weight: Approximately 1517 to 1579 pounds

Wheelbase: 58 inches (147 cm)

Performance

The John Deere 4110 offers dependable performance with its robust compact engine, efficient hydraulic system (pump flow 5.1 gpm), and reliable power transmission.

Its rear lift capacity is 1150 lbs at 24 inches, allowing it to handle a variety of implements and attachments with ease.

The tractor’s mechanical four-wheel drive and power steering enable good maneuverability in different terrains.

Key Features

Reliable Yanmar diesel engine optimized for fuel efficiency

Flexible transmission options including hydrostatic drive

Mechanical 4WD with differential lock for enhanced traction

Compact and lightweight design for agility and convenience

Wide range of attachments and implements availability

Two-post folding Roll-Over Protective Structure (ROPS) for operator safety

Common Problems

The John Deere 4110 is generally regarded as a dependable machine with few recurring issues.

Some owners note wear on hydraulic components and occasional challenges with transmission synchronization in older models.

Regular maintenance, especially on the hydraulic system and transmission, helps ensure long-term reliable operation.

Attachments

The John Deere 4110 supports various attachments enhancing its utility:

54-inch and 60-inch mid-mount mower decks for lawn maintenance

Front-end loaders for material handling

Backhoes for small digging tasks

Category 1 three-point hitch compatible with many implements

Jd 4110 tractor Price

The price range of a used John Deere 4110 varies based on condition, year, and included attachments.

Generally, these tractors can be found priced between $6,000 and $12,000 on the used market, making them an affordable option for compact utility tasks.

Checklist for a used John Deere 4110

  1. Safety Features

  • Ensure the Roll-Over Protective Structure (ROPS) is present and in good condition.

  • Check for a functioning seat belt if the tractor has a ROPS.

  • Verify that safety switches on clutch, brakes, PTO, and transmission are operational.

  1. Visual and Physical Inspection

  • Examine the tractor for signs of rust, dents, or missing paint indicating neglect or past accidents.

  • Inspect tires for tread wear, damage, or repairs; consider replacement costs.

  • Wiggle the water pump and check belts for stability and tightness (engine off).

  • Check all fluid levels (engine oil, hydraulic oil, coolant) and look for contamination or leaks.

  1. Mechanical and Engine Health

  • Start the engine and observe exhaust smoke color: clear is good; white, blue, or black smoke may indicate issues.

  • Check the clutch and brake pedal wear for signs of heavy use or abuse.

  • Test steering for smoothness; power steering should not produce jittery or stiff feedback.

  • Raise and lower the 3-point hitch to ensure smooth hydraulic operation.

  • Test brakes for effectiveness in holding the tractor stationary.

  1. Hour Meter and Usage

  • Check the hour meter for reasonable total run time; 400-800 hours is typical for used 4110s.

  • Ensure the hour meter is functioning and increasing when engine runs.

  1. Attachments and Implements

  • Inspect common attachments for the 4110 such as mid-mount mower decks, front loaders, backhoes, and blades for wear and functionality.

  1. Electronics and Lights

  • Make sure all gauges, lights, flashers, and electrical components work properly.

  1. Transmission and Drivetrain

  • Test shifting through all transmission speeds to confirm smooth engagement.

  • Verify 4WD operation and differential lock function.

  1. Maintenance Records

  • Request maintenance logs to verify regular upkeep.

  • Ask about any recent repairs or parts replaced.

  1. Price Evaluation

  • Compare asking price to typical range ($6,000-$12,000) based on condition, hours, and attachments.

  1. Seller and Documentation

  • Confirm tractor identification numbers (VIN/serial).

  • Verify ownership and clear title.

This checklist is vital to making a well-informed purchase of a John Deere 4110, helping identify potential red flags before buying and ensuring the tractor meets operational and safety standards for your needs.

Conclusion

The John Deere 4110 tractor remains a solid choice for those needing a compact, reliable, and versatile utility tractor.

Its efficient Yanmar engine, multiple transmission options, and compatibility with a variety of attachments make it suitable for farming, landscaping, and property maintenance tasks.

With proper care and maintenance, the John Deere 4110 delivers years of dependable performance at a reasonable price point.

This tractor combines maneuverability, power, and flexibility in a user-friendly package worthy of consideration for any small to mid-sized agricultural or landscaping operation.